Full Size Filco Majestouch 2 Keyboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the top portion of the full sized Filco Majestouch 2 case. I was inspired to make this case, as I…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a model of the top portion of the full sized Filco Majestouch 2 case. I was inspired to make this case, as I often see custom TKL cases for sale, but almost never any full sized. Due to the size of the case I needed to split it into 3 pieces to print on my Ender 3, but I've also provided a single model for those with lager printers.
Potential Issues: Due to my own modeling skills I really couldn't make the screw stand-offs as strong as I liked, but I did model the case so it would be tight when placed on the keyboard and they aren't really needed. My suggestions would be if your having problem with them, just snip them off and glue metal ones on.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
.3 mm
Infill:
15%
Filament:
TIANSE Wood PLA
Wood
Notes:
Any layer height should function fine and no supports or rafts should be needed.
After sanding the parts I used super glue gel and then Wood Plastic to bond the three pieces together. I then stained the parts with mahogany stain and finished with 3 coats of polyurethane. If printed at a slow speed and smaller layer height, your favorite bonding against may be all that is needed.
How I Designed This
With electric calipers, Thinkercad.com and many many prototypes.
Category: Parts