flip open (magnetic) hex bit case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact 6mm standard hex bit holder for up to 12 bits. You can put 5x1mm magnets in it to make the bits rattle less.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This bit case was based of a similar one i used on an internship once, but I forgot the brand and couldn't find it or something similar for sale anywhere. So I designed it myself!
The case does work without any magnets, but they are recommended. The bits stay in place while the case is closed, but the magnets prevent any bits falling out while opening, and allow for easier one-handed opening. The required magnets are 5x1mm round magnets and need to be glued in.
PRINT ORIENTATION IS IMPORTANT!!!
The outer part should NOT be printed with the short oval sides facing down! This will cause the part to break during assembly and operation of the case! I recommend printing with the open side on the buildplate with supports, since this looks the nicest, but it does use quite a bit of supports.
The inner part is designed to be printed with the holes facing up, this minimizes changes to the holes for the bits and the magnets.
I printed the example in PLA with a 0.2mm layer height on a Bambu Lab A1 mini.