1 / 8
Sturdy Soap & Shampoo Dish for Shower - Larger w/ Integrated Hook — zdjęcie 1
1 / 8

Sturdy Soap & Shampoo Dish for Shower - Larger w/ Integrated Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

25mm left & right files with the tray part longer and wider, and replaced the threaded hook with an attached one.

Ocena
5 / 5
Polubienia
13
Pobrania
75
Wydruki
1
Wyświetlenia
299
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Original Model by ThreeDMichael found here >>>> https://www.printables.com/model/332911-sturdy-soap-and-shampoo-dish-for-your-shower

 

The original model is well done. However, I wanted the actual tray part to be bigger to hold more than 2 bottles at a time and still be easy to grab things from. The location of the original hook was also way too close to the center pipe, so I filled this in and added an integrated hook on the far side for better access. I made both the left and right versions in the 25mm size. It works with the original 25mm spacer and bolt files found under the original creator's make. Modified using Fusion 360.

Print Settings:

  • Material: Prusament PETG - Pistachio Green, also printed in Elegoo Rapid PETG - Beige

  • Nozzle Size: 0.4mm

  • Layer Height: 0.2mm

  • Infill: 15% Adaptive Cubic

  • Supports: None

  • Brim: None

  • Build Plate: Textured PEI

  • Printer: Printed a version on the Elegoo Centauri Carbon and one on the Prusa XL (0.2mm SPEED setting).

  • Slicer: OrcaSlicer for the Elegoo CC, Prusa Slicer for the XL

  • Printing Time: ~2.5-3 hours with the ECC and XL, double that if printing with MK3S+