1 / 8
Sturdy Soap & Shampoo Dish for Shower - Larger w/ Integrated Hook — image 1
1 / 8

Sturdy Soap & Shampoo Dish for Shower - Larger w/ Integrated Hook

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

25mm left & right files with the tray part longer and wider, and replaced the threaded hook with an attached one.

Rating
5 / 5
Likes
13
Downloads
75
Makes
1
Views
298
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Original Model by ThreeDMichael found here >>>> https://www.printables.com/model/332911-sturdy-soap-and-shampoo-dish-for-your-shower

 

The original model is well done. However, I wanted the actual tray part to be bigger to hold more than 2 bottles at a time and still be easy to grab things from. The location of the original hook was also way too close to the center pipe, so I filled this in and added an integrated hook on the far side for better access. I made both the left and right versions in the 25mm size. It works with the original 25mm spacer and bolt files found under the original creator's make. Modified using Fusion 360.

Print Settings:

  • Material: Prusament PETG - Pistachio Green, also printed in Elegoo Rapid PETG - Beige

  • Nozzle Size: 0.4mm

  • Layer Height: 0.2mm

  • Infill: 15% Adaptive Cubic

  • Supports: None

  • Brim: None

  • Build Plate: Textured PEI

  • Printer: Printed a version on the Elegoo Centauri Carbon and one on the Prusa XL (0.2mm SPEED setting).

  • Slicer: OrcaSlicer for the Elegoo CC, Prusa Slicer for the XL

  • Printing Time: ~2.5-3 hours with the ECC and XL, double that if printing with MK3S+