IKEA Skadis 100, 130, 180 and 230 mm hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooks for IKEA Skadis
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A collection of hooks for the Ikea Skadis. From 100 mm up to 230 mm.
Printing
Layer height: 0.2 mm
Infill: 20%
Wall loops: 2 for quick print but only light weight. 4 for a good balance between print speed and supported weight. 6 for slow print but heavier weight. There are 2 cavities in the model to strengthen the model.
Print orientation : horizontally (with Skadis holes vertical). The model has been designed so it can also be printed vertically.
Support: no
Skadis assembly
The model use the "T-Clip" system from "Line Arc Line". Please download the T-Clip from Line Arc Line's Printable's page: https://www.printables.com/model/256896-skadis-t-clip-system