customisable Gridfinity bins for square tubes e.g cnc cutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
customisable Gridfininity bins for CNC cutters in square tubes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For storing CNC cutter I had seen various designs that store tubes on their side making it easy to see all the tools however the ones I found only supported shorter tubes (50mm cnc bits) for small diameter cutters (<=6mm) but wouldnt fit the longer ones I had or larger cutters.
This seemed like an opertunity to have a go with openscad so I have created a configurable holder for square tubes which should allow customisation for any size of tube you have. I have put the holder variants I have tested so far as STL files and will add any others I need once I have tested them, for other variants these can be generated from the openscad source or I can upload other combinations if there is interest.
The sourcode is derived from the gridfinity rebuit openscad project.
The sourcecode for generating the bins can be found at https://github.com/Tyler-Ward/gridfinity-tube-bins or is included in the zip file under other files.