Prusa MINI Print Sheet Holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three different types of Prusa MINI printsheet holders for HSW (Honeycomb Storage Wall)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa MINI Print Sheet Holder for HSW
Intro
Another creation of something I just couldn't find out there :)
I looked for a Honeycomb sheet holder thats usable for my Prusa MINI print sheets but I couldn't find any - so I I designed one (or rather three, you'll see) and here it is!
Files:
There are three different versions of the holder I designed. So far, they are made for 3 sheets.
Straight and Even (basic)
Straight and Stepped (for better gripping of the sheets)
Inclined at 5° and Stepped (if you have something limiting you above the sheets, like I do)
You'll find the LEFT version for download --> just copy and mirror in your slicer to get the right side.
Printed Parts:
Left and right part of the sheet holder
2x hollow insert (I used those from RostaP. However, you'll find a lot of them out there, but I don't know about different dimensions.)
Print Instructions:
PLA, 2 perimeters and 15% Infill is absolutely sufficient
Assembly
Push the two holder parts into one hollow insert each.
Install the holder parts with correct distance of three combs between them on your HSW.
Final remarks:
If you have any ideas for improvement or other requirements than me, feel free to reach out.
And finally: Happy printing!