1 / 3
Lens cap holder for Nikon Z Lenses (46 & 62mm) — zdjęcie 1
1 / 3

Lens cap holder for Nikon Z Lenses (46 & 62mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lens cap holder for the Nikon Z kit lenses that come with the Z50II, or any lens with a 46 and a 62mm lens cap

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
277
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a lens cap holder for the lenses that come with a Nikon Z50 II kit, the first is to fit a 46mm lens cap, the second is for a 62mm lens cap. There's a number of other designs out there that do the same thing and look similar but none of them had the right combination of sizes that I needed so I just made my own up and thought that I would share it here. 

The specific lenses that I'm working with are the DX 16-50/3.5-6.3, and the DX 50-250/4.5-6.3, and since the DX 24/1.7 uses the same cap that works just as well. 

The slots in the back are sized to accept the stock camera strap that the camera ships with and it just slips in without having to re-thread things, so if you have replaced the camera strap with something thicker you might have to edit this to increase the size of the slot. 

I did my final print for this using PLA with 20% infill, as long as you print it with the flat part down it shouldn't need any supports or anything like that. 

Tagi