1 / 3
Lens cap holder for Nikon Z Lenses (46 & 62mm) — image 1
1 / 3

Lens cap holder for Nikon Z Lenses (46 & 62mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a lens cap holder for the Nikon Z kit lenses that come with the Z50II, or any lens with a 46 and a 62mm lens cap

Rating
0 / 5
Likes
5
Downloads
40
Makes
0
Views
281
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a lens cap holder for the lenses that come with a Nikon Z50 II kit, the first is to fit a 46mm lens cap, the second is for a 62mm lens cap. There's a number of other designs out there that do the same thing and look similar but none of them had the right combination of sizes that I needed so I just made my own up and thought that I would share it here. 

The specific lenses that I'm working with are the DX 16-50/3.5-6.3, and the DX 50-250/4.5-6.3, and since the DX 24/1.7 uses the same cap that works just as well. 

The slots in the back are sized to accept the stock camera strap that the camera ships with and it just slips in without having to re-thread things, so if you have replaced the camera strap with something thicker you might have to edit this to increase the size of the slot. 

I did my final print for this using PLA with 20% infill, as long as you print it with the flat part down it shouldn't need any supports or anything like that. 

Tags