1 / 1
Kawasaki mechanical water seal press and extractor — zdjęcie 1

Kawasaki mechanical water seal press and extractor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a press and extractor set for the Kawasaki ER6 series of motorcycles. It should work on other bikes with the…

Ocena
0 / 5
Polubienia
8
Pobrania
35
Wydruki
0
Wyświetlenia
519
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is a press and extractor set for the Kawasaki ER6 series of motorcycles.

It should work on other bikes with the same engine.

Original part number for the seal is 490631055.

You will also need:

  1. threaded rod M8 140mm in length

  2. M8 nuts, 2pcs

  3. M8 wide washers 30mm OD, 2 pcs

  4. M8 standard washers, 2 pcs

  5. two metric wrenches #13

The parts should be printed as tough as possible, a lot of force is applied to them. Regular PLA will work.

OpenSCAD sourse attached.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

75

Filament: Generic PLA

Notes:

7 walls
6 bottom

6 top

3d infill

Category: Hand Tools

Tagi