Bushing Barrel Case for SF1-08xx
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a barrel adapter made for SF1-08xx series bushings. One or more bushings can be inserted in the barrel…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is just a barrel adapter made for SF1-08xx series bushings.
One or more bushings can be inserted in the barrel and used like an LM8UU replacement.
I've tested this with 3 SF-0808 inserted and with 2 SF1-0810. Can also take SF1-0812 without letting the bushing stick outside.
They fit perfectly into these bearing clips: https://www.thingiverse.com/thing:1848700
Tips:
Print the barrel in ABS, ASA or PC for higher reliability
Print it standing upright, no supports are required
Use machine oil to lubricate the rods and the bushings
Do not overtighten the assembly
Noise will go down when changing from LM8UU bearings to SF1-08xx bushings
Use the thing linked above for Original Prusa MK2/MK3
Category: 3D Printer Parts