Indoor cycling table, Zwift Racing Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large table for indoor trainings sessions on the bike to fit all the stuff you might need. Laptop, tablet, phone, bottle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed my own table for indoor trainings sessions on the bike. It's designed in a size to fit phone, laptop, tablets, bottles and all the other stuff in might need or want to have in reach.
I used the Creality Ender-3 V3 Plus with 300mm x 300mm plate. So you need a big printer and still the table is set together with 4 bigger and smaller accessory parts.
The table is really stable and takes my 14" MacBook, iPad, phone and bottles with ease. I put some holes around the table if I might wanna add anything there later, like bottle holder, cable management whatever.... Some of these things I already planned but haven't printed or tried myself. Maybe someone comes up with good ideas. One hole for the screw is always combined with second hole for a small 6mm pin to get rid of any movement for attached parts. I attached one bottle holder and prototypes for a magsafe phone holder. Dimensions for the magsafe charger are the Baseus one.
For the top parts I made one with honeycomb structure and one flat.
I printed the table in PLA and works fine. The holes for the legs are tight but it's better to sand them down to get a snuck fit. For the feet I would use TPU.
What you need, besides big printer and quite a bit of filament:
10x M6x20mm countersunk screws
10x M6 nuts
4x 25mm wooden sticks as legs
few more M6 screws and nuts if you want to add accessory