Indoor cycling table, Zwift Racing Table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large table for indoor trainings sessions on the bike to fit all the stuff you might need. Laptop, tablet, phone, bottle
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I designed my own table for indoor trainings sessions on the bike. It's designed in a size to fit phone, laptop, tablets, bottles and all the other stuff in might need or want to have in reach.
I used the Creality Ender-3 V3 Plus with 300mm x 300mm plate. So you need a big printer and still the table is set together with 4 bigger and smaller accessory parts.
The table is really stable and takes my 14" MacBook, iPad, phone and bottles with ease. I put some holes around the table if I might wanna add anything there later, like bottle holder, cable management whatever.... Some of these things I already planned but haven't printed or tried myself. Maybe someone comes up with good ideas. One hole for the screw is always combined with second hole for a small 6mm pin to get rid of any movement for attached parts. I attached one bottle holder and prototypes for a magsafe phone holder. Dimensions for the magsafe charger are the Baseus one.
For the top parts I made one with honeycomb structure and one flat.
I printed the table in PLA and works fine. The holes for the legs are tight but it's better to sand them down to get a snuck fit. For the feet I would use TPU.
What you need, besides big printer and quite a bit of filament:
10x M6x20mm countersunk screws
10x M6 nuts
4x 25mm wooden sticks as legs
few more M6 screws and nuts if you want to add accessory