Fan mount for Technics SA-GX130D receiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for replacing the fan. This mount works with a 60x60x10mm fan with 50mm hole spacing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
The fan broke in a Technics SA-GX130D receiver. This should be a drop in replacement for the fan shroud, using a 60x60x10mm pc fan, except of needing to replace the connector with the connector from the original fan.
Currently I have not tried it yet, since I don't have access to the receiver right now. I will update the model if needed once I have tried, but I wanted to upload it in case someone needs it.
The model has included supports for the mounting clips. Remove the brim, and then just bend the support away.
Print with 0.2mm layer height. I think PETG or ABS works best with the flexing clips, I'm using PETG.