1 / 1
Fidel Castro going hard to the paint hueforge — zdjęcie 1

Fidel Castro going hard to the paint hueforge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

yeah

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Project: castrobasketballv2.hfp 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

  

The Model is 146.68x200mm in size 

You may print at higher layer heights below the Base Thickness of 0.48mm 

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm 

  

Filaments Used: 

#000000 PLA+ Esun Black  Transmission Distance: 0.1 

#455340 PLA+ Esun Olive Green  Transmission Distance: 0.2 

#e8e6d0 PLA PolyLite Natural  Transmission Distance: 21 

#9199a4 PLA Polymaker Panchroma Trans Grey  Transmission Distance: 7 

#ddd7c7 PLA+ Esun Bone White  Transmission Distance: 4.2 

#ffffff PLA+ Sunlu White  Transmission Distance: 5 

This print uses 6 unique filaments 

  

Swap Instructions: 

Start with Black 

At layer #7 (0.64mm) swap to Olive Green 

At layer #8 (0.72mm) swap to Natural 

At layer #15 (1.28mm) swap to Trans Grey 

At layer #16 (1.36mm) swap to Bone White 

At layer #20 (1.68mm) swap to White for the rest.

Tagi