1 / 5
QIDI Q2 Filament troubleshooting for smooth laod and reliable runout sensor — zdjęcie 1
1 / 5

QIDI Q2 Filament troubleshooting for smooth laod and reliable runout sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

troubleshooting for smooth laod and reliable runout sensor

Ocena
0 / 5
Polubienia
17
Pobrania
46
Wydruki
0
Wyświetlenia
1189
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Be careful not to lose the spring and bearing!

<smooth filament load>
I printed five filler parts simultaneously using an 0.08mm Extra-Fine setting.
Select one item in good condition. The print quality is working well with the image2.
Fill it into the gap, and if necessary, trim it into shape with a sharp knife. image3
Please test whether the filament passes smoothly.

<filament runout sensor>
The metal plate cannot move because the screw hole is too small. image4
Enlarge the bolt holes for securing the sensor using a 2.5-2.8mm drill bit. image5
Finish the surface around the metal plate neatly with a sharp knife.

Tagi