1 / 5
QIDI Q2 Filament troubleshooting for smooth laod and reliable runout sensor — image 1
1 / 5

QIDI Q2 Filament troubleshooting for smooth laod and reliable runout sensor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

troubleshooting for smooth laod and reliable runout sensor

Rating
0 / 5
Likes
17
Downloads
46
Makes
0
Views
1,192
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Be careful not to lose the spring and bearing!

<smooth filament load>
I printed five filler parts simultaneously using an 0.08mm Extra-Fine setting.
Select one item in good condition. The print quality is working well with the image2.
Fill it into the gap, and if necessary, trim it into shape with a sharp knife. image3
Please test whether the filament passes smoothly.

<filament runout sensor>
The metal plate cannot move because the screw hole is too small. image4
Enlarge the bolt holes for securing the sensor using a 2.5-2.8mm drill bit. image5
Finish the surface around the metal plate neatly with a sharp knife.

Tags