Counting matching models…
Create a professionally assembled MagicMirror with this high-quality 3D-printable frame parts. This set contains the STL files for the frame parts, which were specially designed to hold the Lenovo Q24i-1L TFT display, a Raspberry Pi 4B,…
After creating a similar exhaust adapter for my Core One, I decided to design one for our office's Qidi Q2. This adapter takes the Qidi Q2 exhaust to a 120mm PC case fan, with another adapter to 4" exhaust hose that will be run to a roof…
Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…
NOTE. YOU WILL NEED TO ROUTE THE PROVIDED QIDI BOX PTFE TUBING THROUGH THE HOLE NEXT TO THE RUBBER WHERE IT WAS PREVIOUSLY ROUTED PRIOR TO INSTALLATION, I HAVE BEEN USING IT THIS WAY FOR A MONTH OR SO NOW WITH NO ISSUES. A simple…
UPDATES 11/16/25 Added versions of both cooling ducts for the smaller 4.1-4.5mm wide heat inserts. This is a lightweight fan duct based off of my original cooling duct design for the Qidi Q2. The duct with both heat inserts and bolts…
Simple cover to prevent debris from falling into the holes around the Z-rods. It should be printed in a heat resistant material. I printed them in ASA. 2025-12-27 v1.5 Thanks to Gleb Grigorian for making me aware of the forgotten screws…
Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…
The original handle was uncomfortable for me. I designed my own version. The main criteria were: simplicity, minimal dimensions, and smoothness (so it wouldn't snag on corners). It's installed in place of the original handle using the…
Rotated the bracket for the Q2 Box 4 to 1 Splitter/Manifold to horizontal so that the 4 PTFE tubes entering the manifold have a lesser radius curve and a longer ‘straight path’ before reaching the manifold. Others found this orientation…
UPDATED 20/01/2026 Screw holes adjusted according to user feedback. Fits both front and top glass panels. SLICING: For the cleanest look use scarf seam painted over the surface where the screws go. .12 layer height, 3+ walls, infill at…
Description The stock model cooling fan duct sucks. Here I have redesigned one. The main purpose is to add air flow guiders so the cooling air could be more even and stronger. To maintain the dimension is important so it would not cause…
A tool to easily disconnect the PTFE tube from the qidibox buffer. You no longer need to lift the buffer to expose the coupler. Just insert this into the hole where the tube is and push down to release the coupler and then pull the tube…
for 280x280 Qidi Q2 5x bulid plates dowel pins added mounting holes added multicolor option you need only support for the M3 counter holes you need also: 8x M3x20 mounting option: 4x wood screws 3mm
4/27/26: Added straight sections scaled for 10mm LED strip per user request These are simple glue-on rails for the popular fantastic QIDI Q2 riser found here ( https://www.printables.com/model/1398127-qidi-q2-riser ) I modeled to fit 8mm…
An alternative version of the PTFE tube holder for the QIDI Q2 3D printer. The holder is slightly smaller in size and has a slightly larger tube opening. Three options are available: a straight one and two with a slight upward lift above…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
Mid-size Rechargeable Desiccant Holder for Qidi Box Resized from the original Plus 4 version to fit the Qidi Q2 print bed (rotate 45°, then scale X to 75%). FR : Boîte à silicagel pour QidiBox — le modèle original pour la Plus 4 ne tient…
Function ：Guide waste material to slide down from the left side of the printer via the chute. Key Features 1. No original part replacement, easy installation 2. Metal-free, fully 3D-printed 3. Printable with any material 4. Only 51g, easy…
I have been using it for over a month now and am very satisfied. Features No original part replacement, easy installation Metal-free, fully 3D-printed PETG printable Only 2g, easy to print, no supports required Significant optimization:…
The printable wrench for the bed leveling nuts is quite loose, and the nuts themselves are pretty tight. I made a newer version that tapers slightly, gripping the nuts much better. I printed this in PLA and it holds up well, unlike the…
Introduction This model is meant as a replacement or upgrade of the Q2's exhaust/air filtration system. It allows for the use of cheap replaceable HEPA filters and activated carbon pellets, and fits 100mm exhaust tubes, and a 100mm inline…
I wanted this because despite the filter on the printer I was still getting heavy ABS fumes. This just pushes onto the printer outlet, and the ducting is taped on like any aircon application. It's a simple design, I didn't get fancy about…
A very simple cap for Qidi q2 riser sent with Qidibox: Prints ok with PLA, maybe best with PETG ...
I made a special stand with a recess to securely hold the original author’s model, because I didn’t like that the filament waste container kept sliding around. I didn’t want to glue it in place, so I mounted it from the bottom of the…
3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…
A new fun door handle for the Qidi Q2 printer. Hold My Beer. Side cutter and deburring tool fits inside. Printed in upright position with tree supports and a brim ( filament Polymaker PC-ABS)
The original Qidi Q2 handle is very small and uncomfortable. I adapted the handle from the Qidi Q1 Pro. The handle printed from silver Silk PLA and glued to double-sided tape. I think you can use any material to your liking :) The screw…
This is supposed to replace the included 3 in 1 filter in the QIDI Q2. The stock filter is really restrictive and is not sealed against the walls very well, so basically nothing goes through the filter, and the fan doesn't do much. This…
A simple rail cleaner for the x-axis of the Qidi Q2 (should also work with Q2C, let me know), dimensions are sightly tuned to allow to put some microfiber cloth or whatever you use between the tool and the rail. Can be used both on top of…
Motherboard fan intake Dust filter for QIDI Q2. The filter cage simply snaps onto the fan opening. It requires a filter fabric sleeve (geotextile) 9 cm wide and approximately 6 cm long. The filter sleeve shown in the picture is welded…
Fan mount lifted 3.4mm and moved back 5mm allowing for placement of Beacon within spec. Utilizes 2x M2.5x5mm screws.
Montageadapter für LCD, es können farbliche Einlagen eingesetzt werden. Die Tür lässt sich bei abgesenktem Display öffnen ohne am Display anzustoßen.
This reduces/adapts the outlet on the back panel of the Qidi Q2 so that a 2.5 inch PVC dust collection hose can be attached to it. It requires 4 M3 screws. You can either thread the screws directly into the plastic (which works just…
Qidi Q2 door seal for hinges and bottom gap. Printed using Elegoo Rapid TPU 95A with 0.20 mm. Double-sided tape is used to attach the seal. It must be able to withstand the chamber temperature.
I wasn't happy with the commercially available options for the Leica Q2. I wanted a simple, no-nonsense L-bracket for my Leica Q2 Monochrom that did not have an integrated grip. Includes a place to store an allen wrench, secured with two…
NOW UPDATED TO NOT RELY ON ADHESIVE -- USE 3MF FOR UPDATED GEOMETRY AND SLICING PARAMETERS Use the preexisting 3X M3 plastic screws to mount the bracket on each side, then use double sided adhesive to mount your strips to the brackets.…
External Tapo C110 mount for the QiDi Q2. Mounts on the upper hinge. Angled to aim camera 20 degrees down and right. Replace the two original (M3x8?) button head cap screws with a pair of M3x10 ones. I recommend printing in ASA with the…
This is a carbon filter housing designed for the Qidi Q2 chamber exhaust fan . It helps to reduce odors and VOCs during printing by filtering the air exiting the chamber. Easy to install and compatible with standard activated carbon…
The original holder is hollow and doesn't provide rigidity under the weight of the spool. For improved rigidity, I also recommend making an insert to attach the spool holder to the printer's metal frame. You can download the insert model…
Wanted a nice clean purge bin for my Q2, have added Qidi logos to make it look OEM. Printed mine in green hyper PETG, works really well with the purged filament making it's way around to the front easily. 2 walls 10% infill and it feels…
The motivation for designing the flat chamber filter door was the recurring failure caused by contact between the plate and the filter door handle. Upon heating the bed to 115 °C, the build plate repeatedly collided with the protruding…
Designed this to replace my glass mouthpiece that keeps breaking from being dropped. Printed in PETG.
Looking for someone to combine these two files into one solid print.
From what I could find and needed, all the purge bins available for the Q2 suffered from one of two problems, hidden rear ones were often difficult to get to depending on printed location, and the ones that push up against the sides,…
Poop chute for the q2 you will need supports for the nipples that go into the screw recess also you will need longer screws I used #4 5/8 pan screw from the hardware store
R3men Graphite Bed for Qidi Q2 is now available for ordering at www.R3men.com The graphite bed is thicker, so for more convenient build sheet alignment you can print out these alignment corner guides prior to bed replacement. You will…
I bought several additional nozzles for my printer and needed a practical way to store them. At first I considered using a separate box, but that felt inconvenient. It makes more sense to keep nozzles exactly where you change them, inside…
My Q2 fun duct melted partially. Original parts were out of stock. Search for alternatives, provided some ideas and the need to compare alternatives. In this project, I compare the original QIDI fan duct design with some ideas that built…
This is a remix that is built upon the fan duct created by mrsheikh. I really only used the fan duct and attached it to the stock fan housing. Then added magnet mounts and a new front cover that will attach to it. I also reprinted the…
About this project: This is my first project shared here, so please don't be too harsh—I am not a professional engineer. Since the new fan is larger in size, it provides a 25% increase in cooling efficiency. In my case, it works perfectly…
for qidi q2 with riser got the qidi💩box for my q2 and in the intial headache stage of getting this pos working right Unhappy with the stock cable chain clips and with hope of smoother filament changing i desinged this to help lift the…
Unscrew the stock mount and position same as pics Remove factory bolt and replace with longer m3 bolt screwed tightly in place of the factory corner bolt. m3 bolt in file must be metal 3d printed otherwise 3d printed in plastic will 100%…
noticed the riser cap model on here, when printed right and wedged in, held in rigid enough to double well as some kind of holder, so i caded this up o.g model: https://www.printables.com/model/1580108-qidi-q2-qidibox-stock-riser-cap make…
Minimal, functional, and made to improve everyday use ✨ This custom oversized door handle for the Qidi Q2 3D printer is designed for comfort and practicality. The larger grip makes opening and closing the printer door effortless,…
I removed the fins and added a bigger fin that slides under the printer / the printer stands 7,5mm abow your desktop)
Update 06/02/2026: When I added the HSW cover on the side where the spool holder is placed, it became impossible to use the spool holder, as it won't fit. So I made a variant of the Q2 bin adapter to have the spool holder interface closer…
This design was originally published in thingiverse Update 19-01-2026: Added an alternative box design. Designed to be used in combination with https://www.thingiverse.com/thing:7273534 I needed a riser for my QIDI Q2 printer and none of…
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
This is my angry face front cover for the Qidi Q2 printer. The model is designed to be printed in multi colour. I printed it in Iemai Silver Grey ASA (cover) and Flash Forge Burnt Titanium ( Face ). It was printed face down, with a brim.…
I made a box riser for Qidi q2 with 2 drawers and a Gridfintiy shelf. I printed it in PETG 15% Gyroid infill, 0,2mm layer hight. Added some coloured infills at the top and sides. For the handles just use some glue. For the sidelock, use…
Modified the original model to use two 2020 or 2040 aluminum extrusions 350mm in length. STEP file is included to remix extrusion length if needed. Also made it a little shallower to save on filament. I had some rubber adhesive strips I…
A very simple remix of the tool head cover. The main reason is to provide better cooling for the heat sink and switch to 3x2mm magnets. Now you can see a filament path.
Uploaded as a backup in case the file is lost. Printed in PET-CF17; the original lightweight design remained weak at the stress point.
Description The stock power supply for Qidi Q2 is 350W which barely powers the system. I personally replaced it with a 600W PS from MeanWell, Model No. LRS-600-24 . It's not mandatory, but a plus for better system operation. This model…
19/04/2026 - Updated to V0.3 - Increased the top and bottom by 1mm to have a bit more structural integrity near the heat-set inserts (there still is a little space to increase more, but the backplate is still the same, so little need for…
Just a basic handle that is easy to grasp versus the oem. Add classic fuzzy skin to give it some nice texture. Step included for you to modify as you wish. Uses same screws as the old handle. Print settings used: .2 LH / 4 walls / 5 top…
cover for the power led of the monitor. It might work on other aoc monitors which also have their led in the center. Happy printing >-<
The stock hepa filter is absolutely not blown by the exhaust fan, so I replaced it with this easy print carbon filter. Fill with activated carbon and replace the standard HEPA filter. ABS/ASA recommended.
Storage system for 4 allen keys and a 7mm spanner. It doesn't take up space and attaches to Qidi Box riser. It prints in about 5 minutes. It doesn't interfere with the ventilation openings.
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
## QIDI Q2 Camera Housing – Seleadlab Klipper USB CAM (130°) This is a modified version of the original QIDI Q2 Nebula camera housing, redesigned to support the Seleadlab Klipper USB Camera with 130° field of view . It is intended for use…
Quiet, high-performance cooling for your Qidi Q2 electronics This direct-fit adapter replaces the small, noisy stock 40 mm mainboard fan with a standard 120 mm fan. Credits & Inspiration This project was inspired by the 80mm fan mod for…
This model was born because I had already bought stuff for my Qidi Q2 off Amazon before the printer itself even arrived. Instead of getting a smaller duct, I figured I'd just make an adapter so I could use what I already have on hand.…
You can attach indicator to the holder and move printer to the 4 corners to measure high of the bed. After adjust high and make it on the same level for all of 4 corners.
Comprend : 2 roulement 608 une tige filleté M8 x 150mm 2 écrou freins M8
The original design was designed for Qidi Plus 4. I modified the bottom tray and tool tray to support the Q2. The original tool tray wasn't designed for the Q2 (wrench and scraper i received was too big for the tray) so i adapted it. See…
I've been looking to better seal the otherwise leaky Q2 for printing materials like ABS and ASA. Although the built in filter does a good job at keeping VOCs at safe levels, some filaments smell really really bad, which lead to the room I…
Q2 bed skirt for the excellent R3men graphite bed. No need for the metal squares to retain the skirt as it uses the bed mounting points instead. Print in a plastic that can handle the 130c bed temps (I used PPS-GF20). Steps included for…
rings herum etwas schmaler / kleiner um es mehr von der Gehäuserückwand weg zu bekommen (Kühlkörper auf der Kamerarückseite stören sonst und die Gefahr das der Druckkopf kollidiert wenn die Kamera zu weit Richtung Druckbett montiert wird)
Replacement battery cover for the lost vape thelema q200
Odys q27 Adapter It needs to hold the screen weight. So mind the following point by printing Print it horizontally with supports with at least 55% infill you will need a bit longer screw than the original
A minimalistic TPU sleeve for the Powkiddy Q20 Mini. Protect efficiently the screen and the shell from scratches. If you like the purple shell, you can find it here https://www.thingiverse.com/thing:4970791 Print Settings Printer Brand:…
This is an alternative shell for Powkiddy Q20 Mini. You will have to print both part (frontplate and backplate) as this design is not compatible with the original shell. Beware this mod have very narrow clearance, you should double check…
I remodeled the magazine stand to mount it on the wall. The 3D files are a reinforced version of the one in the photo (It could already easily hold the weight of three magazines but I reinforced it just to be sure) All you need to mount…
Overview These are instructions and designs to add USB C power to a Phillips Norelco PQ208 (also HQ40) electric shaver. The modification allows the shaver to be powered through USB and makes the shaver more portable. The downside is,…
here is a easy-to-print, easy-to-use Clip-On Lens Cap for the Leica Q (Type 116), Q2, Q3 cameras - not for the Leica Q3-43 can be printed in whatever material, color you want (this one in the picture being Prusa Galaxy black PLA). Excuse…
this is a remix to my Leica Q (Type 116), Q2, Q3 Clip-On Lens Cap in Karls Erlebnis-Dorf appearance. outer contour of the lens cap itself is same to the original model - the strawberry inlay is meant to be printed as one piece while…
Shelf for home server series Qotom Q203* in New design (for example Qotom Q20331G9). ! Check your stand carefully before printing - tray width 228mm! For wide stands! I just received a new Qotom Q20331G9 server for my home lab. The width…
You need some 15mm wide double-sided velcro strips to hold the power bank and the mount. I'm using xiaomi 5000mAh (perfectly balanced) and 10000mAh (too heavy) power banks. Happy Gaming！ Print Settings Printer: Micromake D1 Rafts: Doesn't…
