Qidi Q2 RISER PTFE TUBE LIFT & ALIGN CABLE CHAIN CLIP V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
lifts the ptfe tube and may help if you have qidi box and a sagging cable chain like me
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 196
- Makes
- 4
- Views
- 1,060
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
for qidi q2 with riser
got the qidi💩box for my q2 and in the intial headache stage of getting this pos working right
Unhappy with the stock cable chain clips and with hope of smoother filament changing i desinged this to help lift the ptfe tube and give it some more room to move along x and y axis in a aligned fashion and with a bigger bend radius.
For a while I had a bad sagging cable chain from the cable popping out of the toolhead so for the time being ive just added a zip tie to the toolhead, but may try cad up a solution for that too hopefully soon.
if you want to make it thicker or thinner just lay it flat and scale up on z in slicer
use as many walls and full infill possible
i printed in abs and 0.6 0.24 layer height
but maybe better in 0.4 and 0.2 layer
also adjust for shrinkage, should click in place well like the old clip