Qidi Q2 RISER PTFE TUBE LIFT & ALIGN CABLE CHAIN CLIP V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lifts the ptfe tube and may help if you have qidi box and a sagging cable chain like me
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 203
- Wydruki
- 4
- Wyświetlenia
- 1096
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
for qidi q2 with riser
got the qidi💩box for my q2 and in the intial headache stage of getting this pos working right
Unhappy with the stock cable chain clips and with hope of smoother filament changing i desinged this to help lift the ptfe tube and give it some more room to move along x and y axis in a aligned fashion and with a bigger bend radius.
For a while I had a bad sagging cable chain from the cable popping out of the toolhead so for the time being ive just added a zip tie to the toolhead, but may try cad up a solution for that too hopefully soon.
if you want to make it thicker or thinner just lay it flat and scale up on z in slicer
use as many walls and full infill possible
i printed in abs and 0.6 0.24 layer height
but maybe better in 0.4 and 0.2 layer
also adjust for shrinkage, should click in place well like the old clip