1 / 4
X-axis rail cleaner for Qidi Q2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Under Quality setting, set line width of outer wall to 0.37mm for the tiny ledge to appear
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 282
- Makes
- 5
- Views
- 1,184
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A simple rail cleaner for the x-axis of the Qidi Q2 (should also work with Q2C, let me know), dimensions are sightly tuned to allow to put some microfiber cloth or whatever you use between the tool and the rail. Can be used both on top of the rail and the bottom.
2 walls and low infill (~5-10%), if the tool is a bit springy it performs better.
Important: after slicing, check that the tiny ledge is included in the printing process, if not, try lowering the outer wall line width value by 0.02mm increments and slice again.