Qidi Q2 fan adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for upgrading the stock 2510 heatsink fan to a more powerful 3010 fan on Qidi Q2 series.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 80
- Makes
- 0
- Views
- 878
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
About this project: This is my first project shared here, so please don't be too harsh—I am not a professional engineer. Since the new fan is larger in size, it provides a 25% increase in cooling efficiency. In my case, it works perfectly and is practically silent compared to the other fans.
Wiring & Installation:Підключення та монтаж:Pay attention to polarity: Black (GND) is on the left side of the FAN1 connector.
Note: Klipper might show "speed 0" warning due to high PWM sensitivity. If the fan spins, ignore it.
The fan itself snaps into the adapter slots without screws (screwless mount).
The adapter is secured to the side of the toolhead using one original screw.
There is a guiding pin on the front that fits into the stock hole for perfect alignment.