Qidi Q2 filament purge bin easy and discreet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Qidi Q2 purge bin, discreet, large, and easy to get to
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 1
- Views
- 190
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
From what I could find and needed, all the purge bins available for the Q2 suffered from one of two problems, hidden rear ones were often difficult to get to depending on printed location, and the ones that push up against the sides, though easy to get to and empty, if your limited on space, take up quite a bit of space next to the printer.
This solves both of those problems, easy to grab and empty, yet take up nearly zero extra desk space that the printer itself, and depending on what colour you print, nearly invisible.
All whilst boasting nearly 150cm3 of waste collection space!!
printed in PETG, single wall with 10% infill it used just 140g of filament. though i do maybe recommend 2 walls, with 15% infill. I do recommend a quick top surface pattern though as I did experience a small amount of warping on the bottom few layers when using a complicated pattern. though this maybe a different setting i got wrong. (i've had and been using a 3d printer and cad for 7 days at this point)
Based off the original design from Alemaker 3D