Qidi Q2 Chamber filter door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flush-mounted chamber filter door that does not exceed the internal dimensions.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 116
- Makes
- 1
- Views
- 533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The motivation for designing the flat chamber filter door was the recurring failure caused by contact between the plate and the filter door handle.
Upon heating the bed to 115 °C, the build plate repeatedly collided with the protruding handle of the filter door. The collision caused the build plate to tilt, resulting in a gap at the back of the print and layer deformation at the front.
This occurred consistently at a height of approximately 7 cm above the build plate.
The model is uploaded including a modifier for printing without top and bottom layers. Printed in ASA.
A small flat-head screwdriver should be used to open the door.