1 / 5
Qidi q2 qidibox side hub placement shortest path to toolhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounted in least invasive and shortest and straightess path to the toolhead from outside with least tight bends
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 997
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Unscrew the stock mount and position same as pics
Remove factory bolt and replace with longer m3 bolt screwed tightly in place of the factory corner bolt.
m3 bolt in file must be metal 3d printed otherwise 3d printed in plastic will 100% break, dont say i didnt warn you
make sure your metal 3d printer is very good and can do fine threads.
Or you could just buy a m3 ready made...
if not solid enough, additional hole fine hole can be drilled in and small screw can be driven into plastic frame section.
