Qidi Q2 Exhaust Duct Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple coupler to connect 100mm flexible duct to the outlet on the Q2, so as to vent fumes away from the work area.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted this because despite the filter on the printer I was still getting heavy ABS fumes.
This just pushes onto the printer outlet, and the ducting is taped on like any aircon application. It's a simple design, I didn't get fancy about it.
I printed it in PETG, just because that's what I had here. It would possibly be good in a flexible TPU, but mine's working fine as is.
You can set the exhaust fan in your printer profile for the filament, both during and after the print. I put a mild draw of 30% during the print so as not to cool my cabinet, then 50% on completion to purge all the fumes while the part cools.
Works well.