Qidi Q2 Exhaust Duct Coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple coupler to connect 100mm flexible duct to the outlet on the Q2, so as to vent fumes away from the work area.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted this because despite the filter on the printer I was still getting heavy ABS fumes.
This just pushes onto the printer outlet, and the ducting is taped on like any aircon application. It's a simple design, I didn't get fancy about it.
I printed it in PETG, just because that's what I had here. It would possibly be good in a flexible TPU, but mine's working fine as is.
You can set the exhaust fan in your printer profile for the filament, both during and after the print. I put a mild draw of 30% during the print so as not to cool my cabinet, then 50% on completion to purge all the fumes while the part cools.
Works well.