1 / 2
2 Quart Oil Bottle Holder for 2020 Subaru Crostrek — zdjęcie 1
1 / 2

2 Quart Oil Bottle Holder for 2020 Subaru Crostrek

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keeps 2Q of oil from rolling around. Attaches (with locking plug) to eyelets in trunk. Fits great in cubby on right.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
281
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

A simple, functional print to keep 2 quarts of oil (emergency kit, etc.) from rolling around in your trunk.

Print Settings

  • 0.2mm layer height

  • PLA, PETG, ABS - anything (made mine from PLA, good enough)

  • No supports needed (defaults are fine)

Print Orientation

  • Orient as shown in gallery, with the open side of the adapter facing up

Installation

  • Drop the adapter onto the eyelet/hook

  • Push the plug in through the hole until it clicks into place (it will take a little force)

  • The plug should sit mostly flush with the inside of the ring

  • Drop your bottles in from the top

    • Ideally: Strap the bottles together with a bungee cord, moving wrap, etc.

Removal

  • Remove the bottles

  • Use a screwdriver to pry the plug out using the provided indents

Fusion 360 file is provided if you want to reuse or improve anything!

Tagi