Cardboard Spool Weight Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert that goes into the core of a cardboard spool that you add items in it for additional weight.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you like to add extra weight to your cardboard spools in your AMS or MMU then this is helpful accessory. Slip this into the core and add bearings, coins, nuts, or whatever you have on hand to increase the weight. Increased weight allows for the cardboard spool to function properly in the AMS.
I have been using 1.75 inch ball bearings in mine and they help a great deal. Sometimes they get hung up on the filament that is stuck in the middle to start the roll winding from the manufacturer and it jump around a bit. That is why I came up with this. It gives the spool a more centered weight and the bearing stays stable. Give it a try.
Currently I have this size but will be adding more as I see the need. If you need a different size drop a comment. Thanks:
52nn - Fits eSun
54mm - Fits Elegoo, eSun, Overture
56mm - Plastic Spools
58mm - Plastic Spools
Print Settings:
0.16 Layer height
Any Infill
Any Material
No Supports Needed