MÅLA Marker Lid-Clamping Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do your kids constantly lose lids? This organizer retains the marker lids so you don't lose them, and pens stay fresh.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 567
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This design holds 24 MÅLA marker pens. The inner and outer part squeeze together (with common wood/drywall screws) to clamp the pen lids in the organizer, so when a pen is removed the lid stays fixed.
Solves a real problem in our household!
Printing:
No special requirements or supports needed.
I used 0.2mm layer height, fuzzy skin to hide the seams, and pushed the inside seams to area where the lid wouldn't touch it.
Assembly:
Loosely assemble the marker pens between the inner and outer parts,
(be careful to align the screw holes)Press down on the inner part to lock it initially together, then loosely screw in the 40mm / 1½" screws.
Rest the assembly upside down on the pens to ensure they are all aligned, then progressively tighten the screws until all the pieces are locked together.
Note: If you find that some lids are loose, even after tightening (their plastic is very slippery) you could affix each marker to the outer part with a little hot glue* before initial assembly.
Note to the note: Yes hot glue. The markers are made of polypropylene, and hot glue is one of the few glues that "sticks" to it.