8-Key osu! Mania Keypad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8K keypad designed for osu! Mania. Also works for anything else using the same layout
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
An 8K keypad designed for osu! Mania 4K and 7K
Requires some soldering but switches are hotswappable (optional). Uses a compliant mechanism for the cover so no screws!. Decals are optional; these files don't include it because it's down to personal preference. If you want them, just do it in the slicer or something idk.
Map: Evreka - Halv vs. kuro | 7.49★
BOM
1x Printed case and back cover
8x Printed Handwire Hot Swap Sockets by stingray127
~0.8m total 24SWG solid core wire
1x RP2040-zero (USB-C)(Aliexpress has plenty)
8x MX-style switches and keycaps of your choosing
3x Silicone Lego tape 1x6 stud strips (Aliexpress | Amazon)
A ton of patience
The firmware is configured with direct-pins instead of a matrix; just connect the switches to their corresponding pin and gnd. This also means diodes are not needed :)
Configured key bindings and pins:
S | D | F | V | N | J | K | L |
|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
I won't make an instructions guide since I think it's pretty straightforward and it's good to learn anyways. Basically, print and source all the parts, follow the hot swap socket instructions, put it all together, and flash the firmware. Couldn't be easier, right? /s
But yeah, feel free to ask me anything in the comments.
Enough comments and I'll share the Onshape doc