Liczymy pasujące modele…
This design is based on the work by DaveM . I created a new design for the case that is heavily inspired by Dave's design but tailored to my tastes. The screws for the faceplate are now hidden and the case is more minimalistic. Photos…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
A handheld case for an ESP32 S2 Mini with 1602A LC display and a 4x4 matrix keypad. There is a lot of space if you'd like to add a battery. Display, S2 Mini and the case should be screwed together with melt-in M3/4mm threaded inserts. The…
This is a reverse engeneered design of the Azeron Cyborg II. There are 30 programmable switches and one analog joystick. It runs on an Adafruit KB2040 board with an Adafruit MCP23017 GPIO expander for more pins to connect switches to. The…
Caps for converting a cheap Numeric Keypad to a button box for sim racing/macro purposes. The Caps making it much easier to label the Buttons Simply Glue them on the existing Caps
Angle kit to raise the KBDCraft Adam keypad and keyboard. Mounts on the bottom of the base plate.
The top cover comes in two styles: one is beveled at 45 degrees, and the other has a 6mm rounded chamfer. Parts: 1 Waveshare RP2040-Zero 7 Cherry MX Switches 7 Keycaps 4 M3x12 screw 4 M3x4x5 Brass Hot Melt Insert Knurled Nut 1 EC11 Rotary…
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
I had to make this bigger to cover the hole left by my ADT alarm keypad. I made the screw holes bigger, counter sunk them, and made more of them to find a spot on the wall. The original model fits the Ring security keypad PERFECTLY.
Halter und Gehäuse zum Nuki Keypad 2 Verhindert die Werkzeuglose Demontage des Keypad. Geeignet für Aussenmontage, wenn der Montageort vom Wetter geschützt ist. Es wird die Original Basisplatte verwendet um das Keypad auf den Halter zu…
This is a 3D model of the Aqara U200 Keypad, intended for designing accessories. I originally created it to make a custom holder. Note that the dimensions might not be 100% accurate—especially for the buttons, as I didn't need exact…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
Has your mounting plate broken, or do you just need extras? The model consists of two parts, one backplate, and one spring clip that is glued to the backplate. This is to print the pring clip in the proper orientation. By slicing the…
Remixed this to cover up the old holes from my GE Interlogix Simon XTi. I was to lazy to fill the holes and paint.
Overview The BookKeyPad is a stand that positions the Magic Keyboard and Magic Trackpad together like a MacBook. The name pushes the words together just like the 3D model does to the accessories. The stand tilts both Magic Devices so they…
The keypad on these pistol safes makes a very loud beeping sound for any input. When my toddler discovered the buttons I decided to cover up the keypad. This has a secondary benefit of acting as a guide for the finger using the…
This model is a countertop stand for Ring Alarm Keypad (2nd Generation). Features: Keypad securely stays in place via friction, while presenting keypad at a raised + angled position for easy interaction. Large cavity to store excess…
Small enclosure for the 3x4 Phone-style Matrix Keypad. This is made for the model they sell at ThePiHut ( 3x4 Phone-style Matrix Keypad | The Pi Hut ). I had to change the distance of the pins on the short side down to 45 mm even though…
This is a remix of a model by TzOk, I have made it slightly deeper and added screw holes side mounting tabs for ease of use. M2.5 machine screws self-tap into the matrix keypad's frame quite nicely. The tab holes are M2.5 but M3 is…
This set of files demonstrates a way to make electrical pushbuttons and keypads. It uses conductive filament and PLA. They are formed using a layering of conductive filament and non-conductive PLA. Files included are 3mf and step. There…
The Aqara U200 is a newly released retrofit smart lock, but its keypad design presents a significant security flaw. The keypad can be easily removed and stolen due to a release pinhole that allows anyone to detach it from its wall mount.…
This design is based on the work by DaveM . I created a new design for the case that is heavily inspired by Dave's design but tailored to my tastes. The screws for the faceplate are now hidden and the case is more minimalistic. Photos…
This keypad cover works with 3" X 4.5" keypad. It is designed to slide behind the keypad. Simply loosen existing mounting screws until there is enough space to slide the cover in. Then retighten mounting screws.
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
This was the first thing I designed and printed on my 3D printer. This device holds the keypad at a 30 degree angle for a more neutral hand position and better ergonomics. I can't find the video now, but someone was showing a setup where…
Note: I forgot to put on rubber feet on before taking these pictures. This is a cradle to hold the 8BitDo keypad at the proper typing height when using with a C64X. There is hole in the back for the USB-C charging cable which I just leave…
A handheld case for an ESP32 S2 Mini with 1602A LC display and a 4x4 matrix keypad. There is a lot of space if you'd like to add a battery. Display, S2 Mini and the case should be screwed together with melt-in M3/4mm threaded inserts. The…
Whilst the original product worked and looked OK, it was awkward flat on the desk, so the design started as an angled mount, but then changed into a complete skin for the unit. At under £10 at the time of purchase the 4 key macropad…
My switchbot keypad touch is attached outdoor to the garage door, unfortunately the fingerprint sensor doesn't work if it gets wet, for example due to rain. This cover protects the sensor from rain and other weather influences. A bolt is…
This model contains remapped keys for A4Tech external USB keyboard for use as a CNC pendant. I use kmonad to remap the keys to UGS shortcuts. With simple configuration: (defcfg input (device-file…
Designed this VFD KeyPad Holder for the YL620 available on AliExpress. This fits in the same size hole as the original part, but the dimensions have been updated for the keypad. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
This is a practical holder for the Frient keypad. The keypad can be inserted/removed easily.
To mount arlo keypad to wall. Connecting pins can be modified. More secure with double sided tape. In the picture the pins are broken dont pay attention :)
Cover for https://www.printables.com/model/1016350-aqara-u200-keypad-anti-theft-security-cover to hide the screws and make it less obvious to steal. And also to look a bit better. You should print both models. Originally I have printed…
This is a Cover for the ADT Keypad (Premise Pro Touchscreen) it can be for decoration or for blocking the light. You can also put tint on the inside to help it block more light.
The flip up door on my genie intellicode garage door keypad broke and after contacting genie their advice was to buy a new one. I decided to see what i could do and after about 4-5 iterations this is what i came up with. This is printed…
En lugar de usar los conectores dupont atornillo los cables a los terminales del Arduino Uno Screw Shield v1.
This simple adapter/spacer allows you to install a Combi-Cam E 7910-K10-HRH electronic Cabinet lock on a typical locker with simple cam lock. This was used for the -HRH horizontal model but probably would also work for the standard…
These are just some custtom Covers for a macro keypad, which I have bought from Amazon. e.g this one My keypad has some LED indicators build in. So the covers got fitting coutouts for them as well. have fun!
Simple 9 key keypad using Cherry MX compatible switches. Materials: 9x Any Cherry MX compatible switches (I used gateron yellows) 9x Keycaps, I just printed some (Thanks Joe Scotto for the design!) 9x Diodes (most should work, I'm using…
My design takes into account the attachment with insert threads. I have adapted and extended the models.
This minimalistic cover seamlessly integrates with the Wyze Lock Keypad's original mounting hardware and provides a simple solution to reduce the risk of theft or vandalism. Simply place it behind the original mounting bracket and screw…
Guardian Alarm System Keypad Panel Wall Base. Attach your Guardian Alarm System Keypad to this base panel after attaching base panel to wall.
After mounting the keypad on the wall, you should attach it to it. After it is attached with 2 screws, 2 screw covers that cover the holes are given in the attachment. For those who do not use it with batteries but want to use it with an…
COMPACT AND ELEGANT ENCLOSURE FOR THE NUKI KEYPAD 2. Screws hidden on top + bottom for a cleaner look. Additional parts needed: Qty 2: M3x10 flat head screws (suggested with T10 torx drive) Qty 2: M3 Nyloc nuts. These nuts should be…
I made this oddly shaped macro pad to show off how you can use keyboard-layout-editor.com and swillkb's plate & case builder to create custom 3D printed, hand-wired keyboards. Perfect your layout in keyboard-layout-editor.com Export it as…
I've made custom mounting plate for Switchbot Keypad Touch You can mount it to wall with tape or with screws. Locking mechanism work, you have to put sim card removal on bottom of keypad to remove it from the mount, but you have to remove…
More detailed information about 3D printing and programming of the keypad lock on: https://nerd-corner.com/diy-keypad-lock-3d-printing-and-code/
Wandhalterung und Rahmen für das Nuki Keypad V1. Es dient als Diebstahlschutz und zur Befestigungshilfe, wenn ein Kleben nicht möglich oder erwünscht ist. Es wurde bei mir mit 2 Edelstahlschrauben an die Wand geschraubt. Gedruckt mit PETG.
This is a reverse engeneered design of the Azeron Cyborg II. There are 30 programmable switches and one analog joystick. It runs on an Adafruit KB2040 board with an Adafruit MCP23017 GPIO expander for more pins to connect switches to. The…
Underware mount for Uplift Desk keypad. Fits model JCHT35K2. Use 2x M4 socket head screws, nuts, and washers to attach the backplate to the keypad. Use 2x Multiconnect connectors to attach the plate to the under desk multiboard.
This is a remix of Wowe’s Nuki Keypad 2.0 Cover , modified to remove the button covers while retaining the rest of the design. I made this version because I still wanted to see the numbers on the buttons and be able to insert a pin…
Caps for converting a cheap Numeric Keypad to a button box for sim racing/macro purposes. The Caps making it much easier to label the Buttons Simply Glue them on the existing Caps
This 3D-printable panel is an ideal solution for owners of older Zerowatt dishwashers, DIY repair enthusiasts, or technicians looking to extend the life of discontinued appliances. By printing this model, you can overcome the challenge of…
This replaces the key switch plate for the carbon fiber dash overlay like this https://www.amazon.com/Performance-Plus-Carts-Speaker-Cutouts/dp/B08KP6J16H More info about this project are on my Github page…
We had the space to mount the front door keypad directly to the wall, but the back door setup was more limited—it had to be placed on a cabinet made of particleboard. Rather than mounting directly to the panel surface, I felt more…
Here is my version of Icom IC-7300 Keypad. 4 memo. Knobs used from aliexpress shop: https://a.aliexpress.com/_EHrIWoA Projet can be copy in thinkercad:…
made to repair a Nakamichi 670 machine, these white plastics inside usually get awfully brittle over time, with this design you can replace the original.
Angle kit to raise the KBDCraft Adam keypad and keyboard. Mounts on the bottom of the base plate.
This is a mount for an Arduino keypad that you can aim at. Caution: Print in PETG Ceci est un support pour un pavé numérique arduino que vous pouvez visez. Attention : Imprimer en PETG
Mount for the Aqara G4 door bell along with the U200 door lock keypad with plenty of space in the back for wiring
This is a case for the cheap 70x77 mm 4x4 keypads with fischertechnik compatible grooves at the bottom. Category: Construction Toys
The top cover comes in two styles: one is beveled at 45 degrees, and the other has a 6mm rounded chamfer. Parts: 1 Waveshare RP2040-Zero 7 Cherry MX Switches 7 Keycaps 4 M3x12 screw 4 M3x4x5 Brass Hot Melt Insert Knurled Nut 1 EC11 Rotary…
Ecumaster / blink marine canbus keypad inserts more will be added coming soon Category: Automotive
Printed using TPU and glued to the tab on the F150 using E5000. See the application photo.
A housing protecting the Hörmann FCT3-1BS wireless keypad (code panel) from the environment. Printed with PETG, 0.15mm structural, 3mm walls, 20% infill.
An 8K keypad designed for osu! Mania 4K and 7K Requires some soldering but switches are hotswappable . Uses a compliant mechanism for the cover so no screws !. Decals are optional; these files don't include it because it's a pretty…
The switch plate to a small Raspberry Pi Pico powered keypad. Switch holes are sized for Kailh switches, similar sized ones should fit. This keypad is designed to fit four M3x10mm socket head bolts and four M3 nuts. The bottom case…
Edit 2026 - added a new model which doubles the thickness of the walls to 2mm (four walls) - should hopefully add a bit of resilience! As the guy stuck with maintaining our communal driveway's gate (how? why?) I was getting tired of…
The case to a small Raspberry Pi Pico powered keypad. The case has a mounting point for a Raspberry Pi Pico where two pegs can be squished with a hot metal object securing the Pi Pico. This keypad is designed to fit four M3x10mm socket…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled in STL file The keypad pops in, and the retention features hold it in place.
This is my special designed and small-dimensions made Nuki Keypad 2.0 (with Fingerprint-sensor) Cover/ Enclosure/ Gehäuse. You can use it with or without the original on the backward mounted plate (with the red gluepad). You need the 2…
Keypad cover designed to decrease water intrusion into the keypad. Modified to cover the Mighty Mule MMK200.
Non-printed Parts The non-printed parts for this are: an Adafruit Trinket M0 microcontroller six MX key switches The switches sit in the tray, with their leads sticking out the bottom. The microcontroller rests on 4 pegs inside the box.…
This 3D model is a wall mount for the Nuki Keypad 2.0, designed to hold the keypad at a 45° angle instead of flat against the wall. Mounting the keypad at an angle improves button readability and makes the keypad easier and more…
I made a cover for the Nuki Keypad 2, so that it is not visible directly. It was important to me, that it could be removed by my 7 year old daughter and does not fell off. So it needed to be tight and good to remove. It is printed on a…
i needed to replace a broken keypad starter (codan) in the car. enjoy :-) Category: Vehicles
With this cover you can lock your keypad on the wall at 45/35 degree adapter and you have an hole for touch ID and nother hole for led response.
Модификация корпуса https://www.thingiverse.com/thing:4161582 пульта на основе платы от Jager. Основная статья тут https://modkam.ru/?p=1264 . Позволяет использовать батареи AAA. Только нижняя часть. Остальное по оригинальной ссылке…
A quick and simple yet very effective anti-theft for the NUki Keypad 2.0 Printed with 0.2 mm layers
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
I had to make this bigger to cover the hole left by my ADT alarm keypad. I made the screw holes bigger, counter sunk them, and made more of them to find a spot on the wall. The original model fits the Ring security keypad PERFECTLY.
A small platform for the Yaesu FH-2 External Keypad. I secured my keypad with some velcro
Simple cover for protecting the Tedee Keypad Prod from Rain and Sun Being outside please prefer ABS or PETG. Add support and 20% infill. Print model upsidedown as per picture attached
Halter und Gehäuse zum Nuki Keypad 2 Verhindert die Werkzeuglose Demontage des Keypad. Geeignet für Aussenmontage, wenn der Montageort vom Wetter geschützt ist. Es wird die Original Basisplatte verwendet um das Keypad auf den Halter zu…
Recommended Print Settings Material: ASA or PETG . Note: Avoid PLA, as it will warp or degrade when exposed to direct sunlight and outdoor temperatures. ASA is the gold standard for outdoor use due to its high UV resistance. Infill:…
A simple mount for the Yale keypad and a cover with a clip to prevent it from falling off. Printed in PETG with 2 walls / 10% infill. I separated the model parts in the slicer and sliced the models with the back and the front faced down.…
This is a 3D model of the Aqara U200 Keypad, intended for designing accessories. I originally created it to make a custom holder. Note that the dimensions might not be 100% accurate—especially for the buttons, as I didn't need exact…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
Has your mounting plate broken, or do you just need extras? The model consists of two parts, one backplate, and one spring clip that is glued to the backplate. This is to print the pring clip in the proper orientation. By slicing the…
