1 / 4
Ring Alarm Keypad (2nd Generation) Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a countertop stand for Ring Alarm Keypad (2nd Generation).
Features:
- Keypad securely stays in place via friction, while presenting keypad at a raised + angled position for easy interaction.
- Large cavity to store excess length of power cable if connected. Access holes for cable both at top and back of stand.
- Locations for optional stand feet. Included optional print plate for 4 feet using TPU filament. Or, can use any 15mm or smaller rubber feet (such as https://www.amazon.com/dp/B06XPCLN23 used in included pictures, which provided better grip than TPU)
- Stand prints in 2 halves to remove the need for supports and produce a cleaner print. The two halves friction fit together, or can use glue if desired.
Recommended print settings:
- 0.2mm layer height is fine, 0.08 produces better looking results
- Used 8 wall loops for solid feel, but not necessary.
- Included pictures are using Bambu PLA Matte Ivory White