1 / 4
Ring Alarm Keypad (2nd Generation) Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a countertop stand for Ring Alarm Keypad (2nd Generation).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 120
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a countertop stand for Ring Alarm Keypad (2nd Generation).
Features:
- Keypad securely stays in place via friction, while presenting keypad at a raised + angled position for easy interaction.
- Large cavity to store excess length of power cable if connected. Access holes for cable both at top and back of stand.
- Locations for optional stand feet. Included optional print plate for 4 feet using TPU filament. Or, can use any 15mm or smaller rubber feet (such as https://www.amazon.com/dp/B06XPCLN23 used in included pictures, which provided better grip than TPU)
- Stand prints in 2 halves to remove the need for supports and produce a cleaner print. The two halves friction fit together, or can use glue if desired.
Recommended print settings:
- 0.2mm layer height is fine, 0.08 produces better looking results
- Used 8 wall loops for solid feel, but not necessary.
- Included pictures are using Bambu PLA Matte Ivory White