Nuki Keypad 2.0 Cover Enclosure Gehäuse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is my special designed and small-dimensions made Nuki Keypad 2.0 (with Fingerprint-sensor) Cover/ Enclosure/ Gehäuse. You can use it with or without the original on the backward mounted plate (with the red gluepad).
You need the 2 parts here downloadable - The Frontpart and the Wall-site-Part. With only 2x smal screws (2,5mm thick, 5mm long) the frontpart can be mounted on the Wall-site-Part. The hole construction can be mounted in the end with double-site-gluepads or 4mm thick-screws on the wall.
For Material it is recommended PETG or ABS.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20% geradlinig
Notes:
No need support if you let the wide-suurface on the Printerplate. Very easy to print also with PLA or PLA+.
Category: Household