1 / 4
Nuki Keypad 2.0 Cover Enclosure Gehäuse — image 1
1 / 4

Nuki Keypad 2.0 Cover Enclosure Gehäuse

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

License
Creative Commons — Attribution — Share Alike

This is my special designed and small-dimensions made Nuki Keypad 2.0 (with Fingerprint-sensor) Cover/ Enclosure/ Gehäuse. You can use it with or without the original on the backward mounted plate (with the red gluepad).

You need the 2 parts here downloadable - The Frontpart and the Wall-site-Part. With only 2x smal screws (2,5mm thick, 5mm long) the frontpart can be mounted on the Wall-site-Part. The hole construction can be mounted in the end with double-site-gluepads or 4mm thick-screws on the wall.

For Material it is recommended PETG or ABS.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0,2mm

Infill:

20% geradlinig

Filament: Prusa PETG Black

Notes:

No need support if you let the wide-suurface on the Printerplate. Very easy to print also with PLA or PLA+.

Category: Household

Tags