Trash containers for Dolce Gusto exhaust capsules (new version 2)

These trash cans have been designed for Piccolo XS (De Longhi) Dolce Gusto.
It fits perfectly with the indicated model.

I added three versions of the container for the trash cans: one is aesthetically better, but requires more filament, the others (see picture) are lower.

The frame is not suitable for other models or other brands (ie. Krups) of the same model (i'm not sure for Krups model… let me know if you try it).

To print with PRUSA Mini please separate the main frame from container in your Slicer software and print them separately

Printing tips
1) REMOVED (version2)
2) The main frame and container can be print with standard values (0.20mm layer height) in PETG or PLA.
3) Removable container can be print with standard values (0.20mm layer height), see below for material tips

Material tips
Please note that removable containers require a material that is resistant to high temperatures, such as ASA or ABS (or PC if it is possible to print it)... or you need to wait (PLA, PETG) for the capsule to cool inside the machine before removing it.

Important - NEW - 20/08/2022 - version 2 (revision)

I've made some adjustments:

• some minor fixes to the frame
• I enlarged the removable containers to fit some non-standard capsules that are larger than the original DolceGusto
• i improved the thickness of the cans, so now these are more resistant (printing with spiral vase mode is easier to break it if you use the 0.4 nozzle, so do not print in the spiral vase mode))