Filament Color Swatch System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament swatches (compatible with labels 15 x 30 mm), storage box, holding system etc.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I often had to open my Ikea 365+ storage containers to see which colours were inside. So I came up with a system where I not only have a box with my filament samples, but also a matching holder that can be easily attached to a storage container with double-sided tape.
Filament Swatches
A 15x30mm sticker, e.g. from Niimbot, can be affixed to the lower part of the swatch. Available in several designs, with a decorative hex element or plain – text could also be added here. I have already created a template with text, which can be customised as desired.
Holder
The holder for the storage containers is available in single, double and triple versions. They can be easily attached with double-sided adhesive tape.
Box
The box holds 34 swatches and can be expanded with additional boxes on each side using connectors. You can put neutral caps on the connection points or caps for specific purposes, e.g. material type, in stock or out of stock, etc.
Alternatively, you can also use a divider that shows which filament is in stock and which is not, depending on the side. The divider and caps can also be printed very easily with colour changes.