Magnetic P2S Poop Bucket (bigger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic poop bucket for Bambu P2S. Made for 4 18mm magnets. Bigger version of P2S Poop Bucket.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
P2S Poop Bucket that gets connected with x4 18mm magnets.
Should also work for P1S & X1C as they have the same poop chute.
If anyone tries it let me know in the comments please as I only have a P2S.
Holds a good amount more then the smaller version I made.
This works fantastic and the 4 18mm magnets hold it strong and it doesn't move during printing.
The magnets also make it very easy to take off to empty.
The magnets also sit flush with the back of the poop chute.
Supports not needed but recommended only for the top of the magnet openings to ensure the magnets fit nicely.
Classic hexagon look. I used Super Glue for the magnets to hold.
Dimensions: 110mm Wide x 85mm tall x 65mm Deep
I Made a smaller Version first and realized after a couple AMS prints that I wanted something bigger.
Most poop buckets I see are to close to or on the ground,
which I feel like may effect the vibrations from printing.
(maybe not much but why worry about it at all?)
Smaller Version included in pictures for size reference
Smaller Version:
Most poop buckets I see are to close to or on the ground,
which I feel like may effect the vibrations from printing.
(maybe not much but why worry about it at all?)