1 / 4
Lampvoet voor stolp // lamp base for bell jar — zdjęcie 1
1 / 4

Lampvoet voor stolp // lamp base for bell jar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

lampvoet voor stolp, openscad lamp base for bell jar, openscad

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

Lamp base for bell jar. The openscad file has a bit of an explanation in Dutch.

It is intended to be printed in spiral vase mode with fat walls and a 0.6 or 0.8 nozzle, with the lower few layers in regular mode, see added screenshot. The layers up to the support ribs are printed in regular mode, the layers above in vase mode.

It fits a 10 cm diameter plastic bell jar that Action sells as "Seasons & Style stolp op houten voet Ø 12 x 18 cm".  (The base is 12 cm, the jar itself has the diameters as listed in the .scad file) and a lamp socket with cord and switch that Praxis sells. Both probably available elsewhere also.

The hollow base can be used to store excess cord length. Perhaps glue in a bit of extra weight too, for stability.

//

Lampvoet voor glazen stolp. Het OpenSCAD-bestand bevat een korte uitleg.

Bedoeld om te printen in spiraal/vaas modus met dikke wanden en een nozzle van 0,6 of 0,8 mm, waarbij de onderste paar lagen in normale modus worden geprint (zie bijgevoegd screenshot). De lagen tot aan de steunribben worden normaal geprint, de lagen daarboven in vaasmodus.

De voet past op een plastic stolp met een diameter van 10 cm, zoals verkocht door Action als "Seasons & Style stolp op houten voet Ø 12 x 18 cm" (de voet is 12 cm, de stolp zelf heeft de diameters zoals vermeld in het .scad-bestand) en een lampfitting met snoer en schakelaar van de Praxis (en waarschijnlijk andere bouwmarkten).

De holle voet kan gebruikt worden om overlengte van het snoer in kwijt te kunnen. Ik heb er wat knikkers en mecano/merkur in gelijmd voor wat extra gewicht en stevigheid, zodat 'ie wat stabieler staat.

Tagi