Sovol SV08 Dual Shear Stepper Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Dual Shear mounts for the XY/AB steppers on the Sovol SV08 to allow greater belt tension without deformation.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dual shear mount addon for the AB/XY steppers.
You will need motors with a shaft of at least 29mm, preferably ~35mm in order for this to work.
BOM:
2x 625zz Bearings
3x M3x35mm Socket Head Cap Screws
(Optional) 16mm/17mm Snap Rings to retain the bearings. You can also use the printed clips if you want. If you use the printed clips you'll need to cut out a 1-2mm section of it to press fit it in place.
Instructions:
Print with the top surface on the bed (legs sticking up) with auto-generated normal or tree supports. I recommend Voron print settings (5 floors, 5 ceilings, 4 walls, 40% infill of the cubic-ish variety).