Sovol SV08 Dual Shear Stepper Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Dual Shear mounts for the XY/AB steppers on the Sovol SV08 to allow greater belt tension without deformation.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 21
- Makes
- 1
- Views
- 207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dual shear mount addon for the AB/XY steppers.
You will need motors with a shaft of at least 29mm, preferably ~35mm in order for this to work.
BOM:
2x 625zz Bearings
3x M3x35mm Socket Head Cap Screws
(Optional) 16mm/17mm Snap Rings to retain the bearings. You can also use the printed clips if you want. If you use the printed clips you'll need to cut out a 1-2mm section of it to press fit it in place.
Instructions:
Print with the top surface on the bed (legs sticking up) with auto-generated normal or tree supports. I recommend Voron print settings (5 floors, 5 ceilings, 4 walls, 40% infill of the cubic-ish variety).