WEN 6321 Belt Sander 1.25in Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits the WEN 6321 belt sander. The light blue is the new 1.25" adapter, the dark blue transparent is the original…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This fits the WEN 6321 belt sander. The light blue is the new 1.25" adapter, the dark blue transparent is the original 2.5" adapter. I designed the 2.5" adapter, but I was asked to make one for a 1.25" hose, so here it is. I put a taper on it, because the only 1.25" hose fitting I still have tapers from ~1.23" to 1.35" over a 2.5" length, so I put a similar taper on this one. Original 2.5" adapter.
The 2.5" adapter I originally designed does not have a taper because I designed it to fit on 2.5" flex hose that does not have a cuff on the end designed for tapered fittings.
I did not print this to check the fit for the hose. If you are the first to print it, let me know if it needs to be modified. I know it fits the WEN because I didn't change that side of the adapter.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
25%
Filament: Hatchbox PETG Black
Notes:
.
Category: Parts