1 / 1
43mm Fork Seal Driver — zdjęcie 1

43mm Fork Seal Driver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Seal driver for 43x54mm inverted motorcycle fork. Designed for Honda CBR929RR.

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
156
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Fork oil seal driver for a Honda CBR929RR. Fits 43x54mm fork seals. Suitable for inverted forks. All parts are 3D printable. Features a large flange to press or hammer on and a top collar to protect the stanchion from accidental blows.

Recommended Print Settings

Print vertically. The curved side of the flange is the top side. A modifier can be used to print the top collar at reduced strength, since its only purpose is to protect the stanchion.

You'll need to print 1 male side, 1 female side, and 2 locking pins.

Material

Nozzle

Layer Height

Strength

Supports

PLA

0.4mm

0.2mm

40% infill, 8 top shell layers.

No; brim recommended.

Tagi