43mm Fork Seal Driver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Seal driver for 43x54mm inverted motorcycle fork. Designed for Honda CBR929RR.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Fork oil seal driver for a Honda CBR929RR. Fits 43x54mm fork seals. Suitable for inverted forks. All parts are 3D printable. Features a large flange to press or hammer on and a top collar to protect the stanchion from accidental blows.
Recommended Print Settings
Print vertically. The curved side of the flange is the top side. A modifier can be used to print the top collar at reduced strength, since its only purpose is to protect the stanchion.
You'll need to print 1 male side, 1 female side, and 2 locking pins.
Material | Nozzle | Layer Height | Strength | Supports |
|---|---|---|---|---|
PLA | 0.4mm | 0.2mm | 40% infill, 8 top shell layers. | No; brim recommended. |