WristWatch G2 NiteHawk36 Mount (3 Point) BETA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted the mount for EBB/SHT from the repository to fit the NiteHawk36 (1.4)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This PCB mount was very close to working, but just was missing the last little bit to make it work well. The cable LDO provides is a bit chonky, so this extends the length of the cable support and better accommodates the overmolded end.
Additionally, the small support pillar at the bottom of the mount would press on a resistor on the nitehawk, so I just split this up and moved it to an open spot on this PCB.
NOTE: I have not mounted this up and tested it extensively yet. Fit tested on revision 1.4.2
Directions
Print it with voron settings, or whatever you feel like.
Requires 2 heatsets for the mount itself. You'll also need an extra heatset in the extruder.
Additionally you need to print the 3 spacers from the original repository
https://github.com/tetsu97/WristWatch-G2-Extruder/tree/main/STLs/CANBoard_Mounts