Voron spring steel sheet storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple stackable comb-style tabs to store print sheets.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a few different print sheets and you don't change between them frequently, this part is for you: The lazy man's tab!
Print as many sets of 3 as-needed to build your "storage comb" on top of your existing side-panel clips. 2mm total thickness with a 1mm-thick tab for very light-duty applications.
You need to replace existing screws on you panel clips--the first tab needs a screw 4mm longer for each mounting location, and each additional tab adds 2mm length. A "standard" Voron build uses M3x12 screws on the "thick" panels--my pictured 3-tab install uses M3x20 as an example.