Voron spring steel sheet storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple stackable comb-style tabs to store print sheets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 5
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a few different print sheets and you don't change between them frequently, this part is for you: The lazy man's tab!
Print as many sets of 3 as-needed to build your "storage comb" on top of your existing side-panel clips. 2mm total thickness with a 1mm-thick tab for very light-duty applications.
You need to replace existing screws on you panel clips--the first tab needs a screw 4mm longer for each mounting location, and each additional tab adds 2mm length. A "standard" Voron build uses M3x12 screws on the "thick" panels--my pictured 3-tab install uses M3x20 as an example.