127mm Sandpaper Tray System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sandpaper Tray System for storing 127mm sandpaper discs.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
All the versions I found of this had some of the features that I wanted, but none of them had all the features.
When wall-mounted, the trays swing 120degrees wall to wall allowing full access to the papers inside.
There is a finger hole in the bottom centre to allow for the papers to be pushed up.
The top bracket is a thru-hole allowing for adding and removing trays as required.
A label bracket was incorporated so that labels can be changed and are not printed into, or glued onto the trays so that they can be re-assigned as the content changes.
This one is designed to work with 8mm linear rod as the only extra piece. The screw holes in the mounting plates are sized for #8 wood screws.
All STL's can be printed flat without any supports.
Labels are designed to allow for either multi-color printing, or for the embossed text to be coloured with a marker.