127mm Sandpaper Tray System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sandpaper Tray System for storing 127mm sandpaper discs.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 84
- Makes
- 0
- Views
- 568
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
All the versions I found of this had some of the features that I wanted, but none of them had all the features.
When wall-mounted, the trays swing 120degrees wall to wall allowing full access to the papers inside.
There is a finger hole in the bottom centre to allow for the papers to be pushed up.
The top bracket is a thru-hole allowing for adding and removing trays as required.
A label bracket was incorporated so that labels can be changed and are not printed into, or glued onto the trays so that they can be re-assigned as the content changes.
This one is designed to work with 8mm linear rod as the only extra piece. The screw holes in the mounting plates are sized for #8 wood screws.
All STL's can be printed flat without any supports.
Labels are designed to allow for either multi-color printing, or for the embossed text to be coloured with a marker.